Summary
Key information on shipping chemicals
- Class 3 and Class 8 goods can be shipped via LetMeShip, subject to specific exceptions. When shipped in small packages, they are usually classified as ‘Limited Quantity’.
- The safety data sheet is the starting point. Section 14 provides the UN number, class and packing group – without this information, it is not possible to make a booking.
- Different UN numbers must not be packed together in a single consignment. This is the most common mistake made with mixed chemical consignments.
- Heated and temperature-controlled substances are excluded, as are several acids and nitrous acid mixtures.
Who ships paints, varnishes and chemicals for business customers?
Express carriers generally do transport chemicals in small containers – but only for business customers with a dangerous goods agreement. For those who only send goods occasionally, this involves a level of effort that is hardly worth it: separate contracts, separate checks and separate onboarding procedures with each carrier.
LetMeShip brings all this together. You do not need your own contractual relationship with DHL, UPS or FedEx; instead, you simply need authorisation from us – assessed and granted by our dangerous goods safety adviser, and, provided the requirements are met, arranged directly within a 15-minute appointment. You can then compare carriers and services in the booking form and make your own booking.
Typical senders include paint and varnish manufacturers, chemical suppliers sending samples, cleaning product distributors, laboratories and industrial companies sending consumables to service centres. Find out more about the entire process on the dangerous goods shipping page.
Class 3 and Class 8 in small packaging
Most chemical consignments in B2B parcel delivery fall into one of these two classes of dangerous goods:
- Class 3 – flammable liquids: paints and varnishes (UN 1263), solvents, adhesives, alcohol-based preparations, flammable liquids not otherwise specified (UN 1993).
- Class 8 – corrosive substances: acids, alkalis, concentrated cleaning agents, electrolytes, accumulators.
For small packages, the regulations for Limited Quantities under Chapter 3.4 of the ADR often apply: if you remain below the quantity limits per inner packaging and per consignment, some of the labelling and documentation requirements are waived. The ‘Excepted Quantities’ provisions under Chapter 3.5 of the ADR and Section 2.6 of the IATA DGR go even further. Important: Empty packaging that has been used to transport dangerous goods is also subject to the dangerous goods regulations.
Whether your consignment is LQ-compliant depends on the UN number, packaging group and fill level. The relevant values are set out in the dangerous goods table for your UN number; you will find the relevant details in the safety data sheet.
What is excluded
So that you know before your appointment what might cause a consignment to be rejected – these substances are excluded under our special conditions for dangerous goods shipping bookings:
- Class 3, air and road: UN 1162 (dimethyldichlorosilane), UN 1308 (zirconium suspended in a flammable liquid) and substances that must be transported at elevated temperatures (UN 3256, UN 3257).
- Class 8, air and road: UN 2215 and UN 2576 in molten form, UN 1796 (nitrous acid mixture), UN 1826 (waste nitrous acid mixture) and UN 2031 (nitric acid).
- Class 8, road: UN 2794 and UN 2795 (wet batteries containing acid or alkalis) – unless they fully comply with ADR Special Provision 598, the transport route does not include a ferry crossing, and the consignment note and packaging bear the notation ‘UN 2794/UN 2795 – ‘Not restricted in accordance with Special Provision 598 of the ADR’ is indicated.
- Regardless of the class: substances subject to temperature control. This also excludes reagents and chemicals that must be transported under refrigerated conditions.
- Classes 6.1 (toxic substances) and 2.3 (toxic gases), as well as UN 3077 and UN 3082 (environmentally hazardous substances, n.o.s.), are also completely excluded.
The modes of transport are also limited: we do not cover rail, sea or inland waterway transport, not even as a multimodal solution. And for road transport, the platform’s shipping service ends at the 1,000-point limit in accordance with ADR 1.1.3.6 – for larger quantities, you will need a specialist freight forwarder.
Safety Data Sheet and Declaration
For chemicals, the safety data sheet is the key document. Before making any booking, you are obliged to check it – particularly Section 14 – for completeness and accuracy, to select the appropriate dispatch option on the portal, and to observe the warnings and validations. The safety data sheet must be enclosed with the dangerous goods in accordance with the requirements of the carrier handling the shipment.
In the booking form, enter the dangerous goods class, description, UN number, packing group, the tunnel restriction code (if applicable), as well as the quantity per consignment, total quantity and gross weight – and whether it is LQ or EQ. Once your account has been activated, the platform will guide you through these mandatory fields. Information on what else must be included on the consignment can be found under Labelling and Transport Documents.
FAQ
Frequently asked questions about shipping chemicals
Can I send paints and varnishes as a parcel?
Yes, as a business customer once your account has been activated. Paints and varnishes fall under Class 3; when shipped in small containers, they are often classified as ‘Limited Quantity’. Requirements include UN-compliant packaging, correct labelling and a complete safety data sheet.
Can I send several chemicals in one parcel?
Not with different UN numbers. Dangerous goods with different UN numbers that are packed together in a single consignment or outer packaging are excluded from transport via LetMeShip. However, multiple packages with the same UN number are permitted, provided the quantity limits are observed.
Do I need training to handle chemicals?
Yes. Anyone preparing or booking consignments of dangerous goods must have completed training in accordance with ADR 1.3 for road transport or IATA DGR 1.5 for air freight. We require proof of training upon account activation; on request, we can arrange training providers. It is not necessary to have a designated dangerous goods safety adviser for this.
Can I send laboratory chemicals under refrigerated conditions?
No. Substances subject to temperature control are generally excluded from transport via LetMeShip, regardless of their dangerous goods class. We do not handle cold chain logistics.
